Plastic quality household mould

ตั้งกระทู้ใหม่

Mold injection molding is a processing method used in the mass production of some complex-shaped parts. The specific principle refers to: the plastic raw materials melted by heat are pushed by the screw of the injection molding machine into the cavity of the Plastic quality household mould/mold plastic mold under high pressure, and after cooling and solidification, the plastic molded product is obtained.　　
The plastic mold is composed of two parts: a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. During injection molding, the movable mold and the fixed mold are closed to form a pouring system and cavity. When the mold is opened, the movable mold and the fixed mold are separated to take out the plastic products. Although the structure of the plastic mold may vary widely due to the variety and performance of the plastic, the shape and structure of the plastic product, and the type of injection machine, the basic structure is the same.　　

The plastic mold structure is divided by function, which is mainly composed of: pouring system, temperature control system, molding parts system, exhaust system, guide system, ejection system, etc. Among them, the pouring system and molded parts are the parts that are in direct contact with the plastic and change with the plastic and the product. They are the parts in the plastic mold that are complex and change a lot, requiring high processing finish and precision. In fact, plastic molds are not difficult. No matter how the plastic product changes, the structure of the mold used to form the plastic product is nothing more than the above-mentioned aspects.

Plasticmould

21 ส.ค. 63 เวลา 12:31 น.

262

views

แสดงความคิดเห็น

Plastic quality household mould

รายชื่อผู้ถูกใจกระทู้นี้ คน

แสดงความคิดเห็น

บทความที่คนนิยมอ่านต่อ